HSG-CC - Heat-Sealing Mashine

... is designed for testing the heat sealability of films. The pair of sealing jaws is easy to change and the temperature can be individually set.

Hot Tack matching tester
  • Clear parameter view
  • Fast changeable sealing jaws
  • Easy to use
  • Long lifetime

Hot Tack - matching tester

How it works

The HSG-CC is designed for testing the heat sealability of varnished or coated films. The HSG-CC has a removable pair of sealing jaws which temperature may be individually set between ambient temperature and 300°C. In addition, you may control the dwell time and the sealing force. The actual and set temperatures as well as the dwell time and sealing force are shown in the display.

If your lab is not equipped with a compressed-air supply, use our special HSG-CC Compressor Version. You may wish to obtain our special software to evaluate the results for documentation purposes. For sealing jaws with a smooth surface the sealing pressure will be automatically calculated and displayed from the set sealing force.

Test the seam strength of the sealed samples with our Universal Tensile Tester VNG-E.

An optional Hot Tack Device can be obtained as an accessory.

Also, an optional load cell enables you to adjust the force display any time. You may adjust the Temperature, Force and Time parameters with our newly developed HSG-P testing device.

Technical Details

HSG-CC Specification
Test method Simulation of a head sealing equipment to determine the best sealing parameters
Compressed-air supply 6 bar to max. 10 bar
Seal jaws 150 mm x 10 mm smooth(standard). Other specifications upon request Seal temperature
Tolerance < 1.5% FS
Sealing force 40N up to 1000N for the entire sealing area
Tolerance < 1.5% FS
Dwell time 0.1 - 50.0 s
Tolerance 0.1% FS
PC interface serial standard interface RS232, 9.600 Baud
Interface for force adjustment Internal protocol
Dimensions 65 x 35 x 44 cm
Weight 24kg
Storage temperature 0°C - 50°C
Working temperature 15°C - 35°C
Relative humidity max. 80%, non-condensing
Electrical connection 230 V / 50 - 60Hz, max. 500 W
Standard Following ASTM F 2029 - 00

Download Datasheet

Optional Accessories

HSG-C software

This Microsoft® Access based software enables you to document your test results with a click of the mouse.

Load Cell

This HSG-C/CC accessory allows you to adjust the sealing pressure in regular intervals. The whole procedure-from attachment to adjustment-is only a matter of a few minutes.

Standard sealing jaws

For the HSG series we offer the following standard sealing jaws. Other types are available upon requiest. Within the range of 150 mm x 20 mm all surface types are available.

smooth 150 x 20 mm

smooth 150 x 10 mm

smooth 150 x 1 mm

Silicone insert 150 x 20 mm

Silicone insert 150 x 10 mm

teflonised (smooth) 40 x 20 mm (for Hot Tack)

wafered 100 x 4 mm

longitudinally 150 x 10,5 mm

cross-groved 100 x 10 mm

Woodman 60 x 14 mm

Matching devices